Cuts per running meter

With the cuts per running meter, a completely new possibility of laying was created in SOFiCAD:

Within a detail frame, you create a detail cut for a strip foundation, for example. Within this frame, the cut is defined with the reinforcement in it, such as meshes, rebar cuts and also stirrup mats. The stirrup rebar in the view must be provided with a pointer laying with distance information, the stirrup mesh with a mesh mark. A rebar in running lenght must be defined as an Barmark View for the rebars shown in section.

You define layings for the cuts. From the length of these routings, SOFiCAD calculates both the number of stirrups and ironing mats and the length for the required distribution trips depending on their overlap length. In the parameters you can define the delivery length for the VE irons regardless of the other maximum bar length. You can make changes to the detail frame and the layings via handle processing and the properties dialog.

The lengths of the distributor bars are calculated with the minimum required bar length times the number of bars in the cut. A surcharge to be defined in% is added. The result is then rounded up to whole bars according to the respective maximum bar length. The desired surcharge can be defined for the respective VE statement in the Info/Edit Box by default in the parameters. The change in the surcharge is immediately taken into account in the total length.

Note

It is sufficient for the calculation if the pull-out in the formwork including pointer laying and the bars in the cut are arranged in the detail frame. You can make changes to the detail frame and layings using handle editing and the properties dialog.

Please accept marketing cookies to watch this video.

Cut per running meter

Cut per running meter

Command	SOF_B_CPRM_MAKEFRAME_REC
Tooltip	Schnitte per lfdm erzeugt einen rechteckigen Rahmen, der die Verlegungen enthält
Menu	Bewehrung > Schnitt per lfdm > Detailrahmen

Schnitte per lfdm erzeugt einen rechteckigen Rahmen, der die Verlegungen enthält

All elements for the calculation of the running meters of running length rebars, dimensions of stirrup meshes and the number of stirrup rebars installed should be arranged in a rectangular detail frame. The details are assigned automatically (detail nr). Deleted detail numbers are filled in when new detail frames are created. A meaningful name can be given to the detail.

Detail frame from object

Detail frame from object

Command	SOF_B_CPRM_MAKEFRAME_OBJ
Tooltip	Schnitte per lfdm erzeugt aus einer vorhandenen Polylinie einen Rahmen, der die Verlegungen enthält
Menu	Bewehrung > Schnitt per lfdm > Detailrahmen

Schnitte per lfdm erzeugt aus einer vorhandenen Polylinie einen Rahmen, der die Verlegungen enthält

The detail frame from the object also works in the same way as the rectangular detail frames. Here you can draw any polyline that is converted into a detail frame with this command.

Laying over endpoints

Laying over endpoints

Command	SOF_B_CPRM_MAKELAYINGPTS
Tooltip	Schnitte per laufenden Meter erzeugt eine Verlegung zur Festlegung der Länge. Eingabe über zwei Endpunkte
Menu	Bewehrung > Schnitt per lfdm > Verlegung

Schnitte per laufenden Meter erzeugt eine Verlegung zur Festlegung der Länge. Eingabe über zwei Endpunkte

Layings are defined using endpoints. From the length of these layings, SOFiCAD calculates both the number of meshes and stirrup meshes and the length for the required distribution trips.

Relocation from object

Relocation from object

Command	SOF_B_CPRM_MAKELAYING
Tooltip	Schnitte per laufenden Meter erzeugt eine Verlegung zur Festlegung der Länge. Eingabe über eine vorhandene Linie/Polylinie
Menu	Bewehrung > Schnitt per lfdm > Verlegung

Schnitte per laufenden Meter erzeugt eine Verlegung zur Festlegung der Länge. Eingabe über eine vorhandene Linie/Polylinie

Layings are defined using objects (polyline, rectangles).

Laying out of value

Relocation from object

Command	SOF_B_CPRM_MAKELAYINGLEN
Tooltip	Schnitte per laufenden Meter erzeugt eine Verlegung zur Festlegung der Länge. Eingabe über einn Wert
Menu	Bewehrung > Schnitt per lfdm > Verlegung

Schnitte per laufenden Meter erzeugt eine Verlegung zur Festlegung der Länge. Eingabe über einn Wert

Specification of the length of the laying by specifying the value.