Create Objects along Curve

../../_images/make_path_geometry.png Create Objects along Curve

Command

SOF_CABD_MAKE_PATH_WITH_GEOMETRY

Tooltip

Creates elements along a curve out of AutoCAD elements.

Sidebar

Structural Elements

../../_images/edit_path_geometry.png Edit Objects along CurveEdit Objects along Curve

Command

SOF_CABD_EDIT_PATH

Tooltip

Modifies the number of generated elements along the path.

Sidebar

Structural Elements

../../_images/update_path_geometry.png Update Objects along CurveUpdate Objects along Curve

Command

SOF_CABD_UPDATE_PATH

Tooltip

Distributes the source elements back to the path.

Sidebar

Structural Elements

Command to create elements along a curve out of AutoCAD elements. The number of elements to be generated or a distance between the elements can be defined.

The program creates a distribution line bound to the original AutoCAD geometry. The length of the distribution line is taken from the original AutoCAD Geometry.

The elements are created along these distribution line and refer to it. The distance of the first element to the distribution line is taken into account.

The created elements can be changed independently of the source element. If the source element changes, this does not initially affect the other elements.

To reallocate the properties of the source element back to the elements along the distribution line one can use command Update Objects Along Curve. If the geometry of the distribution line geometry changes, the distribution line and the created elements are adjusted, too.

With command Edit Objects Along Curve the number of the created elements can be changed. In this case the elements in the path are also re-adapted to the source element. If the dialog is only opened to check the distribution rule, the elements in the path are not modified.

For creation of the elemente, the following options are available for use:

Fixed Number of Steps

The first element is the source element. It is not counted. The last element is generated exactly according to the lenght of the distribution line.

Step Size

The first element is the source element. Thereafter, elements are created at the given distance to the length of the distribution line. If the distribution length is not exactly divisible with the given distance, a residual length remains.

Align items to Path

Specifies whether to align each item to be tangent to the path direction. Alignment is relative to the first item’s orientation.

../../_images/align_at_path.png

Example: Space Frame System

  • Some structural lines are drawn to define the first frame

  • In this case three AutoCAD lines mark the position of the distribution lines

../../_images/make_path_with_geometry_system.png
  • Choose command Create Objects along Curve

  • Pick the first AutoCAD line at the base of the frame (see 1A)

  • Modify the distance between the generated elements in the dialog (here 3.15 meter)

  • Pick both colums (see 1B)

  • Repeat this with the bracing elements (see 2A and 2B)

  • Change the distance between the generated elements in the dialog (here 1.575 meter) and repeat the command with the rafter (see 3A and 3B)

../../_images/make_path_with_geometry_verteilt.png
  • Finaly the purlin is defined

Allowed elements:

Supported elements are structural points, structural lines, structural areas, springs and constraints between structural points and drawn tendon elements in shell systems.