Rebar info 2#

Scroll through#

Note

If you are looking for a known position number, you can enter it using the keyboard and confirm with ‘RETURN’. If you want all positions to be visible again, use the Scroll Out command.

Note

If you are looking for a known position number, you can enter it using the keyboard and confirm with ‘RETURN’. If you want all positions to be visible again, use the Scroll Out command.

../../../_images/rc1_bron.png Scroll through

Command

SOF_B_RCBROWSEON

Tooltip

Schaltet das Blättern für Stabstahlverlegungen ein

Menu

Bewehrung > Stabstahlinfo

Schaltet das Blättern für Stabstahlverlegungen ein

With this you can look at each position individually. All positions except the rebar mark to be considered are switched off. In this way you can scroll through and check all reinforcement positions. The layer T__KONS can be switched on or off.

Leaf out#

../../../_images/rc1_brof.png Leaf out

Command

SOF_B_RCBROWSEOFF

Tooltip

Schaltet das Blättern für Stabstahlverlegungen aus

Menu

Bewehrung > Stabstahlinfo

Schaltet das Blättern für Stabstahlverlegungen aus

With this command you can show all positions again after the command “Scroll on”.

Show position#

../../../_images/stst1ein.png Show position

Command

SOF_B_RCBROWSEONMORE

Tooltip

Blendet beliebige Positionen der Stabstahlverlegung ein, die beim Blättern ausgeschalten wurden

Menu

Bewehrung > Stabstahlinfo

Blendet beliebige Positionen der Stabstahlverlegung ein, die beim Blättern ausgeschalten wurden

You can use the “Show mark” command to switch on individual rebar marks.

Hide position#

../../../_images/stst1aus.png Hide position

Command

SOF_B_RCBROWSEOFFMORE

Tooltip

Blendet beliebige Positionen der Stabstahlverlegung aus

Menu

Bewehrung > Stabstahlinfo

Blendet beliebige Positionen der Stabstahlverlegung aus

You can use the “Hide mark” command to switch off individual rebar marks. To reactivate all positions that have been switched off, select the “Show mark” command.

Show reinforcement#

../../../_images/SHOWLAY1.png Show reinforcement

Command

SOF_B_DISPLAYLALLBARS

Tooltip

Blendet alle Stäbe der verlegten Bewehrungen in der Ansicht temporär ein. Wird z.B. durch zoomen wieder gelöscht

Menu

Bewehrung > Stabstahlinfo

Blendet alle Stäbe der verlegten Bewehrungen in der Ansicht temporär ein. Wird z.B. durch zoomen wieder gelöscht

The linear routings of straight bars (A1 or 00) are temporarily displayed for information. This enables the laying areas to be checked.