Generate extracts¶
In SOFiCAD, Barmark Views (extracts) represent the rebar bending shape that is to be produced. In SOFiCAD we distinguish between the Baemark View, the Barmark View in the formwork and the Barmark View Copy.
An extract can always be created in several ways. The individual parameters can be entered as numbers. In this case, the position and orientation of the member must first be defined. It is more convenient to enter by showing formwork edges. The position of the rod is usually clear here, so that no further entries are required. Mixed forms are also possible.
Extracts¶
Command |
Auszüge |
Tooltip |
Erzeugt Stabstahlauszüge mit beliebigen Biegeformen |
Ribbon |
None |
Menu |
Bewehrung > Stabstahlauszüge zeichnen |
Generation of steel extracts for all bending shapes. The entry is made by showing formwork edges with the intelligent cursor or by specifying the individual parameters.
The options available for defining the geometry are displayed on the command bar.
Point: It enables the definition of a geometry without the help of a reference line.
Formwork: The insertion point and the end point are defined after selecting two cutting lines.
Additional options for the A1 / 00 bending shape:
Parallel: It allows the selection of a reference line to define the direction of the geometry. Then you can define the insertion point and the end point using the options shown in the command bar.
Central: This option is suitable for creating bars with anchoring on both sides. By selecting a reference line, you define the geometry of the element. You can define the anchorage of the bar by entering a numeric value or using the overlap option.
Perpendicular: In this mode, the selection of a reference line creates a geometry that is perpendicular to it.
Overlapping: This option enables the selection of another extract in the formwork, which is used as a reference to define the insertion point of the geometry. In addition, the overlap distance is quickly calculated using the “Anchorage-Overlad” menu.
Split¶
Command |
Split |
Tooltip |
Teilt eine Linie in Bewehrungsauszüge auf |
Ribbon |
None |
Menu |
nicht verfügbar |
This allows a selectable line to be divided into sections of equal length. The overlap and member length can be freely defined.
Bending shape 00 / A1¶
Command |
Biegeform 00/A1 |
Tooltip |
Erstellt Stabstahlauszüge mit der Biegeform 00/A1 |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates a Barmark View with the 00 / A1 bending shape
Bending shape 11 / A2¶
Command |
Biegeform 11/A2 |
Tooltip |
Erstellt Stabstahlauszüge mit der Biegeform 11/A2 |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates rod steel extracts with the bending shape 11 / A2
Bending shape 21 / A3¶
Command |
Biegeform 21/A3 |
Tooltip |
Erstellt Stabstahlauszüge mit der Biegeform 21/A3 |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates a Barmark View with the bending shape 21 / A3
Bending shape 15 / C1¶
Command |
Biegeform C1 |
Tooltip |
Erstellt Stabstahlauszüge mit der Biegeform C1 |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates rod extracts with the bending shape C1
Bending shape 31 / B1¶
Command |
Biegeform B1 |
Tooltip |
Erstellt Stabstahlauszüge mit der Biegeform B1 |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates a Barmark View with the B1 bending shape
Bending shape X1¶
Command |
Biegeform X1 |
Tooltip |
Erstellt Stabstahlauszug aus einer beliebigen Polylinie |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates a bar extract from any polyline
Bend shape 26 / C2 support¶
Command |
Biegeform 26/C2 Stütze |
Tooltip |
Erstellt Stabstahlauszug aus einer beliebigen Schalungskante |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates rod steel extracts with the bending shape 26 / C2 (inputs for supports)
Bending shape 31 / B2¶
Command |
Biegeform B2 |
Tooltip |
Erstellt Stabstahlauszüge mit der Biegeform B2 |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates bar extracts with bending shape B2
Bending shape X2¶
Command |
Biegeform X2 |
Tooltip |
Erstellt Stabstahlauszug aus beliebigen Schalkanten |
Ribbon |
None |
Menu |
nicht verfügbar |
Creates a steel bar extract from any formwork edge